Filter
Top Products
80
Model LR16 [Recorder function / Other functions]
Software version upgrade
When the software version of the LR16 is up-
graded, you can upgrade the LR16 by your-
self. The upgraded software can be down-
loaded via the Fostex website (http://
www.fostexinternational.com/).
Use either of the methods below to upgrade
the software.
The downloaded software file has the ".mot"
extension. See the Fostex website for details
about how to download the file.
<Method 1>
Use the "USB" menu in the MENU mode to
connect the LR16 to a personal computer and
transfer the downloaded upgrade file to the
internal hard disk of the LR16. For details
about how to transfer a file, see page 74.
INSERT
INSERTINSERTINSERTINSERTINSERTINSERTINSERT
INPUT
AUX SEND (-2dBu)
EFF SEND (-2dBu)
GROUP (+4dBu)
R STEREO OUT (+4dBu) L
ST MIX OUT (-10dBV)
USB
MIDI OUT
FOOT SW CONTROLLERPANEL LOCK
LOCK
PHANTOM
POWER
INSERT
INSERTINSERTINSERTINSERTINSERTINSERTINSERT
INPUT
AUX SEND (-2dBu)
EFF SEND (-2dBu)
GROUP (+4dBu)
R STEREO OUT (+4dBu) L
ST MIX OUT (-10dBV)
USB
MIDI OUT
FOOT SW CONTROLLERPANEL LOCK
LOCK
PHANTOM
POWER
<Method 2>
Connect a USB memory stick to a personal
computer and copy the downloaded upgrade
file to the USB memory stick, then connect
the USB memory stick to the [USB HOST] port
of the LR16.
Note that you cannot connect a personal com-
puter to the LR16 while a USB memory stick
is connected to the LR16.
<Note>:
If you attempt to select the same
destination channels as the memory play
signal, the warning message as below is
shown and you cannot select the chan-
nels.
(3) Use the [MENU] dial to highlight "MemPlay"
item and press the [ENTER] key.
The current setting ("-/-" by default) starts
flashing.
• To assign the destination channels of Memory play
(4) Use the [MENU] dial to select the
destination channels and press the
[ENTER] key.
You can select from channel pairs ("1/2",
"3/4" and "5/6") as well as "-/-".
When "-/-" is selected, no channel is
assigned.
(5) Press the [STOP] key to exit the MENU
mode.
<Note>:
If you attempt to select the same
destination channels as the SUB IN sig-
nal, the warning message as below is
shown and you cannot select the chan-
nels.
<Memo>: If you initialize the system
memory via the "Sys default memory"
menu item of the "System" menu, these
items revert back to the default settings.
<Note>:
If you cannot download the file from
the Fostex website, consult the Fostex ser-
vice station or your nearest dealer.
USB memory stick
Personal computer