Filter
Top Products
Model LR16 [Names and functions]
30
Display details
HOME screen
While stopped or during playback or recording, the Home screen as below is shown.
On the Home screen, the following items are displayed.
a
c
d
e
g
h
i
b
f
j
(11) [EFF SEND] jack
This unbalanced phone jack outputs the
EFFECT buss signal at -2dBu nominal level.
You can connect to the input jack of an effects
processor, etc.
(12) [USB HOST] port
By connecting a FAT16 or FAT32 USB memory
stick to this port, you can copy project data (or
stereo mix file) to the memory stick and then
transfer it to a computer. You can also use the
USB memory stick when upgrading the version.
(Note that you cannot use the [USB HOST] and
[USB PC] ports simultaneously.)
(13) [USB PC] port
By connecting to the [USB] port of a personal
computer using a USB cable, you can transfer
files between the computer and the LR16 by
the computer operation. (Note that you
cannot use the [USB HOST] and [USB PC] ports
simultaneously.)
(14) [GROUP OUT (1, 2, 3, 4)] connectors
These balanced phone jacks output the group
buss signals at +4dBu nominal level. You can
connect these jacks to input connectors of an
external mixer, etc.
(15) [ST MIX OUT (L, R)] jacks
These unbalanced RCA pin jacks output the
stereo L and R buss signals. You can connect
these jacks to an external master recorder, etc.
(16) [STEREO OUT (L, R)] connectors
These XLR balanced connectors output the
stereo L and R buss signals. You can connect
these connectors to a power amplifier for
driving main speakers on stage, etc.
b) Project name
The project name of the current project is
displayed.
The project name of the first project created
on the internal hard disk is "PROJ001" and the
last three-digit number is counted up each time
a project is created.
You can specify the default project name via
the "Rename" menu item in the "Project" menu
of the MENU mode.
a) Project number
The project number of the current project is
displayed in three digits.
The project number of the first project created
on the internal hard disk is "001" and the
project number is counted up each time a
project is created.