Filter
Top Products
41
Model LR16 [Mixer functions]
You can connect a stereo audio source such
as a CD player, MD player, etc., to the [SUB IN
(L, R)] jacks and output it directly from the
control unit.
Therefore, you can connect a BGM source and
play it back during a break in the show, etc.
Using SUB IN
[SUB IN] control
Audio player
The input signals from the [SUB IN] jacks are
level-adjusted by the [SUB IN] control. The
signals from the [SUB IN] jacks are assigned
to channels 15 and 16 by default, however,
you can change the assignment using the "In-
put" menu of the MENU mode (see "Other
functions" on page 79 for details).
The following shows the setting example for
playing back the signals from the [SUB IN]
jacks by the main speakers of a live stage.
1
2
3
4
5
6
(1) Set the [SOURCE] switches on channels
15 and 16 to "TRK" (
).
The input signals from the [SUB IN] jacks
are selected as the sources of channels 15
and 16.
(2) Use the [SUB IN] control to adjust the level
of the signals from the [SUB IN] jacks.
You can use the [SUB IN] control to adjust
the level of the signals from the [SUB IN]
jacks, but cannot use the [TRIM] control for
them.
The level of the signals after the [SUB IN]
control are displayed on the level meters
of the display.
(3) To output the signals from the [SUB IN]
jacks in stereo, set the [PAN] control on
channel 15 to “L” and set the [PAN] control
on channel 16 to “R”.
(4) Set the [ST] assign switches on channels
15 and 16 to "ON" ( ).
The signal from the [SUB IN] jacks is routed
to the stereo L/R buss.
(5) Use the channel faders on channel 15 and
16 to control the output level of the
channel signals sent to the stereo L/R buss.
(6) Use the [STEREO] faders on channels 15
and 16 to control the level of the stereo buss
signal output from the [STEREO OUT (L,
R)] connectors, which affects the main
speaker volume.
<Memo>: The [SUB IN] jacks can be used to
increase the total number of inputs by con-
necting to a sub mixer.