Filter
Top Products
69
Model LR16 [Recorder functions / Project management]
For details about the information shown on
this screen, see "Export screen details" de-
scribed below.
If you simply execute step (4) on the next
page without changing any parameter, data
of full length (from ABS 0 to REC END) of
all tracks (1 through 16) is exported to the
USB memory stick.
Before you execute step (4), however, you
can shorten the length of the project or se-
lect tracks to be exported (see the right col-
umn on this page for details).
1
2
3
4
5
Duration of the project to be exported. By de-
fault, the full length (from ABS 0 to REC END)
is shown. You can edit and shorten it.
The start track to be exported (by default, 01).
You can change it.
The end track to be exported (by default, 16).
You can change it. The value in parentheses
shows the required space for storing.
The volume label of the USB memory stick.
The free area of the USB memory stick.
1
2
3
4
5
<Export screen details>
<Editing the duration>
1) While "Duration" is highlighted, press
the [ENTER] key.
The second digit starts flashing.
2) Use the [MENU] dial or numeric keys to
enter the desired value at the flashing
point, and press the [ENTER] key.
You can use the [REWIND] or [F FWD]
key to move the cursor (flashing point).
<Selecting tracks>
1) Use the [MENU] dial to highlight
"Start TR" (or "End TR") and press the
[ENTER] key.
The track number of the starting track
(or ending track) starts flashing.
2) Use the [MENU] dial to enter the desired
track number and press the [ENTER]
key to confirm the setting.
<Note>:
Pressing the [CLEAR] key resets the
duration to "00H 00M 00S". If you shorten
the duration, the value in parentheses shown
at the right of the "End TR" number gets
smaller.
<Note>:
If you limit the tracks, the value in
parentheses shown at the right of the "End
TR" number gets smaller.
<Note>:
If you attempt to export the
project data which exceeds the free area
of the USB memory stick, "Over size!"
is shown and you cannot execute ex-
porting data.
(3) Use the [MENU] dial to highlight "Export"
press the [ENTER] key.
After the LR16 checks the USB memory, the
display shows the export screen.