Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Network Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87
Table 8-1 List of parameters for the serving cell
Parameter Description
chann ARFCN (Absolute Frequency Channel Number) of the BCCH carrier
rs RSSI value (0–63) (RSSI= Received signal strength indication)
dBm Receive signal strength of the BCCH (dBm)
MCC Country code (first part of the PLMN code)
MNC Network code (second part of the PLMN code)
LAC Location area code
cell Cell ID
NCC Network color code, which is used to differentiate PLMN subnets
BCC Base station color code, which is used to differentiate intra-frequency
cells
PWR Maximum power level of the RACH (dBm)
PXLev Minimum receive signal level allowed for registration (dBm)
C1 Base station selection coefficient
Table 8-2 List of parameters for dedicated channels
Parameter Description
chann Absolute Frequency Channel Number (ARFCN) of the Traffic Channel
(TCH)
Note:
When <chann>=h, it indicates frequency hopping.
TS Sequence number of time slot
dBm Receive signal strength level of the BCCH (dBm)
timAdv Timing advance value (bits)
PWR Power level
dBm Receive signal strength level of the TCH (dBm)
Q Receive signal quality (0–7)
ChMod Channel mode (--: Signaling, S_HR: Half rate, S_FR: Full rate, S_EFR:
Enhanced
Full Rate, A_HR: AMR Half rate, A_FR: AMR Full rate)
Parameter values set for the ME in different states