Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Other Commands
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
206
013
OK
Example 2:
Set the command line ending character.
ATS3=13
OK
16.3 ATS4 – Command for Setting the Response Format
Character
This command sets the response format character. This character is sent by the TE
and is involved in the head, tail, and end tags of the result code and information
response. If the S4 character in a command line is changed, the result code in this
command line uses the new S4 character immediately.
16.3.1 Querying the Current Format Character
Read
command
ATS4?
Function
Queries the current response format character.
Response
z
In case of successful execution:
<CR><LF><n><CR><LF><CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR:<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Parameter description
<n>: integer, which indicates the ASCII code of the response format character. Value
range: 0–127. Default value: 10.