Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Network Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
The ME has accessed the cell and registered with the network.
Serving cell I Dedicated
channel
Chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS
timAdv PWR
dBm Q ChMod
82 23 -63 460 00 0001 0003 0 0 0 -102 13 I No
connection
The ME has accessed the cell but has not registered with the network (only
emergency calls can be made).
Serving cell I Dedicated
channel
Chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS
timAdv PWR
dBm Q ChMod
82 23 -63 460 00 0001 0003 0 0 0 -102 13 Limited Service
The ME is searching for the network but fails to find a proper cell.
Serving cell I Dedicated
channel
Chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv
PWR dBm Q
ChMod
Searching
The returned result contains the related text information based on the service status.
Value Description
Searching The MS is searching for the network but fails to find a proper cell.
When the MS restarts or is not covered by signals, the MS is in this
service state.
No connection The MS is accessing the cell and registering with the network. In this
case, the service state is “idle”.
Cell
Reselection
The MS is covered by signals of a cell but is searching for a better
cell.
Limited Service The MS is located inside a cell but does not register with the
network. In this case, the MS can make emergency calls only.