Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Configuration
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Factory Settings for AT Commands
AT+CMER <mode>=0, <keyp>=0, <disp>=0, <ind>=0, <bfr>=0
AT+CIND <mode>=1
Commands for serial port control
AT\Q <n>=0
AT&C <value>=1
AT&D <value>=2
AT&S <value>=0
ATE <value>=1
Commands for network services
AT+COPS <format>=0
AT+CREG <n>=0
Commands for the GPRS
AT+CGREG <n>=0
AT+CGSMS <service>=3
ATS7 <n>=060
AT+CBST <speed>=7, <name>=0, <ce>=1
AT+CRLP <iws>=61, <mws>=61, <T1>=78, <N2>=6
AT+CR <mode>=0
AT+CRC <mode>=0
Commands for short messages
AT+CMGF <mode>=0
AT+CNMI <mode>=0, <mt>=0, <bm>=0, <ds>=0, <bfr>=1
AT+CSMS <service>=0
Command for the phone book
AT+CPBS <storage>="SM"
Other commands
ATS3 <n>=013
ATS4 <n>=010
ATS5 <n>=008