Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Network Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
712 20 -73 460 001 2 22 32
e
OK
8.9 AT^SMONG - Command for GPRS Monitoring
The AT^SMONG command performs GPRS monitoring and obtains the information
about the cells that support the GPRS function. The information can be obtained by
execution command and write command. The write command can be set to
periodically return the cell information. To stop periodical return of the cell information,
you can enter any character.
8.9.1 Checking the Parameter Range Supported by This
Command
Test
command
AT^SMONG=?
Function
Returns the parameter range supported by this command.
Response
z
In case of successful execution:
<CR><LF>^SMONG: (list of supported <table>s),(list of supported
<period>s)<CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
Parameter description
<period>: integer parameter. This parameter can be set to periodically return the list
of cell information (in seconds).
Value range: 1–100. If the value of the <period> parameter is omitted, the returned
cell information is displayed in a single line. If the value of the <period> parameter is
set, 10 lines of cell information are returned periodically and each 10 lines are
accompanied by a text title line.
<table>: integer, which indicates the cell information table. The value is 1.
Table 8-3 List of cell information
Parameter Description
BCCH Absolute Frequency Channel Number (ARFCN) of the Broadcast Control
Channel (BCCH)