Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Data Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115
9.3.2 Reading the GPRS Event Reporting Mode
Read
command
AT+CGEREP?
Function
Reads the GPRS event reporting mode.
Response
z
In case of successful execution: <CR><LF>+CGEREP:
<mode>,<bfr><CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
9.3.3 Setting the GPRS Event Reporting Mode
Write
command
AT+CGEREP=[<mode>[,<bfr>]]
Function
Sets the GPRS event reporting mode.
Response
z
In case of successful execution: <CR><LF> OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Unsolicited event reporting
URC 1
+CGEV: REJECT <PDP_type>, <PDP_addr>
The MT disables the reporting of +CRING to the TE. The request for activating the
PDP context on the network is automatically rejected.
URC 2
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network requests for re-activating the PDP context. The <cid> parameter is used
to re-activate the PDP context.
URC 3
+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]
The network requests for deactivating the PDP context. The <cid> parameter is used
to activate the PDP context.
URC 4
+CGEV: MT DEACT <PDP_type>, <PDP_addr>, [<cid>]