Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Short Messages
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159
11.2.2 Reading the Format of Short Messages
Read
command
AT+CMGF?
Function
Reads the current format of short messages.
Response
z
In case of successful execution:
<CR><LF>+CMGF: <mode><CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MS: <CR><LF>+CMS ERROR:
<err><CR><LF>
11.2.3 Setting the Format of Short Messages
Write
command
AT+CMGF=<mode>
Function
Sets the format of short messages.
Response
z
In case of successful execution: <CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MS: <CR><LF>+CMS ERROR:
<err><CR><LF>
Note:
If no parameters of this command are set, AT+CMGF= considers the previously set values
valid for various parameters.
11.2.4 Examples
Example 1:
Set the format of short messages.
AT+CMGF=0
OK
Example 2:
Query the format of short messages.
AT+CMGF?
+CMGF: 0
OK