Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Configuration
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
AT Commands
Commands for call control
AT+CBST <speed>, <name>, <ce>
AT+CRLP <iws>, <mws>, <T1>, <N2>
ATS7 <n>
AT+CR <mode>
AT+CRC <mode>
Commands for short messages
AT+CMGF <mode>
AT+CNMI <mode>,<mt>, <bm>, <ds>
AT+CSMS <service>
Other commands
ATS3 <n>
ATS4 <n>
ATS5 <n>
2.4 ATQ - Command for Controlling the Return of
Execution Results
The ATQ command controls whether to return the execution results to the TE.
Execution
command
ATQ[<n>]
Function
Controls the return of execution results.
Response
z
In case of <n>=0: <CR><LF>OK<CR><LF>
z
In case of <n>=1, no result is returned.
Parameter description
<n>: integer; ATQ is equivalent to ATQ0.
z
0 (default value): The DCE returns the execution results.
z
1: The DCE does not return the execution results.