Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Status Control
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
z
0: disables event reporting.
z
1: enables event reporting.
z
2: queries the settings for event reporting.
3.3.3 Setting the Event Reporting Mode
Write
command
AT^SIND=<indDescr>,<mode>
Function
Sets the event reporting mode.
Response
z
In case of successful execution: <CR><LF>^SIND:
<indDescr>,<mode>,<indValue><CR><LF>
When <indDescr>=“nitz” and <mode>=2:
<CR><LF>^SIND:
<indDescr>,<mode>,<nitzUT>,<nitzTZ>,<nitzDST><CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error: <CR><LF>ERROR <CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Parameter description
<nitzUT>: time information.
<nitzTZ>: time zone information.
<nitaDST>: daylight saving time for adaptive NITZ indicator.
3.4 AT+WS46 - Command for Selecting a Radio Network
The AT+WS46 command sets and queries the radio network of a standard with which
the ME registers.
3.4.1 Querying the Supported Radio Networks
Test
command
AT+WS46=?
Function
Queries the supported radio networks.
Response
<CR><LF> (list of supported <n>s) <CR><LF>
<CR><LF>OK<CR><LF>
Parameter description
<n>: integer; AT+WS46= is equivalent to AT+WS46=12.
12: GSM digital cellular network.