Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Short Messages
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
171
OK
Example 2:
Set the short message notification mode as follows: do not store the short message
and send it directly to the TE; do not send the short message status report.
AT+CNMI=1,2,0,0,0
OK
Example 3:
Set the short message notification mode as follows: store the short message on the
MT and report the storage location to the TE; do not store the short message status
report and report it directly.
AT+CNMI=1,1,0,1,0
OK
Example 4:
Set the short message notification mode as follows: store the short message on the
MS and report the storage location to the TE; store the short message status report
on the MS and report the storage location to the TE; if the short message status
report fails to be reported, the status report is discarded.
AT+CNMI=1,1,0,2,0
OK
11.9 AT+CPMS - Command for Setting the Storage
Location of Short Messages
The AT+CPMS command sets the storage location of short messages.
11.9.1 Checking the Storage Location of Short Messages
Test
command
AT+CPMS=?
Function
Checks the available storage location of short messages.
Response
z
In case of successful execution:
<CR><LF>+CPMS: (list of supported <mem1>s),(list of supported
<mem2>s),(list of supported <mem3>s)<CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MS: <CR><LF>+CMS ERROR:
<err><CR><LF>