Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for the Phone Book
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
188
13.3 AT+CPBS - Command for Selecting the Phone Book
Memory
The AT+CPBS command selects the phone book memory. After the MT restarts, the
MT restores the initial setting to “SM”. Other commands related to the phone book
perform operations by using the phone book memory that is selected by this
command.
13.3.1 Checking the Value Range Supported by the +CPBS
Command
Test
command
AT+CPBS=?
Function
Checks the optional items of the phone book memory.
Response
z
In case of successful execution:
<CR><LF>+CPBS: (list of supported
<storage>s)<CR><LF><CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR:<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Parameter description
<storage>: type of the phone book memory. The following table describes the value
options of <storage>.
Table 13-1 Value options of <storage>
Value Description
SM Phone book on the SIM card (default value)
LD (not supported
currently)
Dialed phone number on the MT
EN (not supported
currently)
Emergency call number on the SIM card (or MT)
FD (not supported
currently)
Fixed dial number on the SIM card. The PIN2 code must be
verified when the option is used.
ON (not supported
currently)
Local phone number on the SIM card
RC (not supported
currently)
List of recent caller IDs on the MT
MC (not supported
current)
List of missing calls of the MT.