Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Data Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
133
9.10.3 Setting the SMS Bearer Domain
Write
command
AT+CGSMS=[<service>]
Function
Sets the SMS bearer domain.
Response
z
In case of successful execution: CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Note:
If no parameters of this command are set, AT+CGSMS= considers the previously set values
valid for various parameters.
9.11 +CGEV – Command for Unsolicitedly Reporting
GPRS MT or Network Events
When an event related to the GPRS MT or network occurs, the MT unsolicitedly
reports +CGEV.