Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Internet Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
141
Display the information about the connection profile whose value of conProfileId is 0.
AT^SICI=0
^SICI: 0,2,1,192.168.50.100
OK
10.3 AT^SISS - Command for Creating the Service Profile
The AT^SISS command sets the service profile.
10.3.1 Checking Whether This Command Is Available
Test
command
AT^SISS=?
Function
Checks whether the AT^SISS command is supported.
Response
z
In case of available command: <CR><LF>OK<CR><LF>
z
In case of unavailable command: <CR><LF>ERROR<CR><LF>
10.3.2 Reading the Status of the Service Profile
Read
command
AT^SISS?
Function
Reads the status of the defined service profile.
Response
z
In case of successful execution:
<CR><LF>^SISS: <srvProfileId>,<srvParmTag>,<srvParmValue>
<CR><LF>^SISS: <srvProfileId>,<srvParmTag>,<srvParmValue>
<CR><LF>…<CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT: <CR><LF>CME ERROR:
<err><CR><LF>
Parameter description
<srvProfileId>: numeric parameter, which identifies the service profile. Value range:
0–9.
<srvParmTag>: string parameter. Currently, only the socket service is supported. The
following table lists the values of <srvParmTag>.