Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Data Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
9.6.3 Examples
Example:
Define the PDP context.
AT+CGDCONT=1,“IP”,“1234”
OK
Activate the PDP context.
AT+CGACT=1,1
OK
Read the PDP address.
AT+CGPADDR=1
+CGPADDR:1,“192.168.50.64”
OK
9.7 AT+CGQMIN - Command for Setting the Acceptable
Minimum Quality of Service Profile
The AT+CGQMIN command allows the TE to specify an acceptable minimum quality
of service (QoS). This profile is verified by the MT and is compared with the
negotiation profile returned by the “PDP context activation” message.
The write command can specify a profile for the context. This profile is identified by
the (local) context identification parameter <cid>. If AT+CGQMIN= <cid> is sent, the
defined QoS of <cid> is deleted.