Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Other Commands
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
207
16.3.2 Setting the Response Format Character
Write
command
ATS4=<n>
Function
Sets the response format character.
Response
z
In case of successful execution: <CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Note:
<n> is not allowed starting with “0x”, or regarding as ATS4=0.
16.3.3 Examples
Example 1:
Query the current response format character.
ATS4?
010
OK
Example 2:
Set the response format character.
ATS4=10
OK
16.4 ATS5 – Command for Setting the Backspace Character
This command sets the backspace character S5. This character is sent by the TE,
indicating the operation of deleting the previous character. This character is identified
and acknowledged by the MS.