Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Internet Services
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
136
10.1.2 Reading the Information About Connection Profiles
Read
command
AT^SICS?
Function
Reads the status of all connection profiles.
Response
z
In case of successful execution:
<CR><LF>^SICS:<conProfileId>,<conParmTag>,<conParmValue><CR
><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MT during command execution:
<CR><LF>+CME ERROR: <err><CR><LF>
Parameter description
<conProfileId>: integer, which identifies a connection profile. Value range: 0–5.
<conParaTag>: string, which indicates the configurable items of a connection profile.
Table 10-1 Parameter names supported by conType in CSD and GPRS0
CSD (Not Supported
Currently)
GPRS0
"conType" Mandatory Mandatory
"user" (not supported currently) Optional Optional
"passwd" Optional Optional
"apn" / Mandatory
“inactTO” Optional Optional
"calledNum" (not supported currently) Mandatory /
"dataType" (not supported currently) Mandatory /
"dns1" (not supported currently) Optional Optional
"dns2" (not supported currently) Optional Optional
"alphabet" (not supported currently) Optional Optional
<conParmValue>: corresponds to the value of conParmTag.
The meanings of different values of conParmTag and the value range of the
corresponding conParmValue are as follows:
“conType”: connection mode of the profile; string; value options are as follows:
z
“CSD”: data call in circuit switched domain (not supported currently)