Filter
Top Products
HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Short Messages
Issue 02 (2010-11-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
168
<ackpdu>: When the value of <service> in AT+CSMS is 1 and network support is
provided, this field is returned. Except for the lack of SCA, this field has the same
format as PDU. (Not supported currently)
11.7.3 Examples
Example:
Send a stored short message in PDU mode.
AT+CMGF=0
OK
AT+CMSS=8 A short message whose status is 2 exists at the
location whose index is 8
+CMSS: 21
OK
11.8 AT+CNMI - Command for Setting the Notification
for a New Short Message
The AT+CNMI command sets the notification that is used to report the received new
short message to the TE.
11.8.1 Checking the Parameter Range Supported by the
AT+CNMI Command
Test
command
AT+CNMI=?
Function
Queries the parameters supported by the CNMI command.
Response
z
In case of successful execution:
<CR><LF>+CNMI: (list of supported <mode>s),(list of supported
<mt>s),(list of supported <bm>s),(list of supported <ds>s),(list of
supported <bfr>s) <CR><LF>
<CR><LF>OK<CR><LF>
z
In case of an error during command execution:
<CR><LF>ERROR<CR><LF>
z
In case of an error related to the MS: <CR><LF>+CMS ERROR:
<err><CR><LF>
Parameter description
<mode>: integer, which sets the short message notification mode.