Filter
Top Products
Quick Start
4
Selecting combinations by bank and number
1.
Press a [COMBI] button. (The button will light.)
You will enter Combination mode. Notice that the upper line of the display indicates
“COMBI 0: Play” (mode name, page number and name).
2.
Make sure that “Combi Select” (combination number and name) is selected.
If this is not selected, use the ClickPoint [
π
][
†
] to highlight the “Combi Select” indication.
3.
Turn the [VALUE] dial to select the combination you want to play.
4.
Press a COMBI BANK [A]–[C] button to switch banks.
When you select a different Bank, the button’s LED will light, and the selected bank will
appear on the left side of the display.
For example, to select bank B, press the COMBI BANK [B] button. The [B] button will light,
and the name Bank B will appear in the left of the display.
Combinations are organized into banks of 128. Select the desired bank, and then select a
combination number within that bank.
5.
Play the keyboard to hear the combination you selected.
While playing the keyboard, use the [MOD] wheel, [PITCH] wheel, [SW1][SW2], and
realtime controllers to modify the sound. The result will differ depending on the
combination, so play the keyboard while operating these controllers to hear what they do.
Note:
You can’t use the [AUDITION] button to play a riff (phrase) in Combination mode.
Selecting combinations by category
In Combination mode you can select combinations by category just as in Program mode. For the
procedure, see “Selecting programs by category” (
☞
p.3).
1
23 4
Mode name
Page number and name
Category number
and name
Tempo
Parameter name
Control assign listTab
Bank
number
Combi Select
(combination
number and
name)
Tab name