Filter
Top Products
57
Quick StartIntroductionSetupProgram
Combination
Playing and Editing Combinations
What’s a Combination?
Combinations, or “Combis” for short, let you split
and layer up to 8 Programs at once.
A Combi is made up of 8 Timbres. Each Timbre
has a Program, along with parameters for key and
velocity zones, mixer settings, MIDI channel and
controller filtering, and so on.
As with Programs, each Combi has 1 Insert Effect,
2 Master Effects, and a Master EQ, for shaping and
transforming the sounds of the individual Tim-
bres. Finally, Combis can use 2 Arpeggio patterns
modules at once.
Playing combinations
Selecting combinations
There are several different ways to select Combi-
nations. Each one is convenient in a different way:
• Selecting combinations from the front panel:
Using “Combi Select” to select a program
Selecting combinations by program category
You can select programs by categories such as
piano or drums.
• Selecting combinations by using a foot-
switch:
You can change combinations even while both
hands are busy playing on the keyboard -
convenient for live applications
• Selecting combinations by receiving MIDI
program changes:
You can switch combinations from an external
MIDI sequencer or an external MIDI controller.
See below for details.
Selecting combinations from the
front panel
1. Press a [COMBI] button. (The button will light.)
You will enter Combination mode. Notice that
the upper line of the display indicates “COMBI
0: Play” (mode name, page number and name).
2. Make sure that “Combi Select” (combination
number and name) is selected.
If this is not selected, use the ClickPoint [π][†]
to highlight the “Combi Select” indication.
3. Use the [VALUE] dial etc. to select the
combination you want to play.
You can use either of the following methods to
select a program.
•Turn the [VALUE] dial.
• Use the [INC] or [DEC] buttons.
• Use numeric buttons [0]–[9] to enter the combi-
nation number, and press the [ENTER] button.
•Press the center of the ClickPoint to highlight
the field, then use [π][†] to select a program,
and press the center to finalize your selection.
·Turn the [VALUE] dial.
· Use the [INC][DEC] buttons.
· Use numeric buttons [0]–[9] to enter the pro-
gram number, and press the [ENTER] but-
ton.
·Press the center of the ClickPoint to high-
light the field, then use [π][†] to select a
program, and press the center to finalize
your selection.
· Use the COMBI BANK [A]–[C] buttons to
select a combination bank.
· Using 10’s HOLD to select combinations
(☞p.39)
· Using “Select by Category” to select by cate-
gory (☞p.38)
· Using Cat. HOLD to select a category
(☞p.38)
Mode name
Page number and name
Category number
and name
Tempo
Parameter name
Control assign listTab
Bank
number
Combi
Select (com-
bination
number and
name)
Tab name
1
23 4