Roland E-50, E-60 Electronic Keyboard User Manual


 
Using the 16-track sequencer
142
r
E-60/E-50 Music Workstation
CREATE EVENT
Press this button icon to add a new event to the
MASTER track. The following pop-up appears:
Press the button icon that corresponds to the kind of
event you want to add.
[TEMPO] refers to tempo events, [BEAT] to time sig-
nature changes, and [SYSTEM¥EXCLUSIVE] to SysEx
strings.
Specify where your new event should be inserted by
pressing the [BAR] field and entering the desired
value using the [DATA÷ENTRY] dial or the [DEC]/[INC]
buttons.
Press the [EXECUTE] field to confirm your settings.
Press [CLOSE] to close the pop-up window without
applying your changes.
ERASE EVENT
Use the [DATA÷ENTRY] dial to select the event you
want to delete.
Press the [ERASE¥EVENT] field to erase the selected
event.
Note: Tempo and time signature events located at “1-01-00”
cannot be erased.
MOVE EVENT
This function allows you to move one or several
events.
Select the event you want to move. To move several
events, it would be a good idea to select the first or
last event of the series.
Note: For this function, you could take advantage of the VIEW
filter to avoid selecting event types that should remain where
they are. See “VIEW” on p. 141.
Note: Tempo and time signature events located at “1-01-00”
cannot be moved.
To select several consecutive events, press the
[DATA÷ENTRY] dial while turning it towards the left
(upward direction) or the right (downward direction).
All events selected in this way appear on a dark back-
ground.
Press the [MOVE¥EVENT] button icon. The following
pop-up appears:
Specify the position to which the first event (in chro-
nological order) of the selected group should be
shifted by pressing the [BAR], [BEAT] and [CPT] fields,
and entering the desired value for each unit using
the [DATA÷ENTRY] dial or the [DEC]/[INC] buttons.
Press the [EXECUTE] field to confirm your settings
and move the event(s).
Press [CLOSE] to close the pop-up window without
applying your changes.
COPY EVENT
This function allows you to copy one or several
events. Use [PLACE¥EVENT] to insert a copy of those
events at the desired position.
Note: For this function, you could take advantage of the VIEW
filter to avoid selecting event types that should not be
included in the copy. See “VIEW” on p. 141.
To select several consecutive events, press the
[DATA÷ENTRY] dial while turning it towards the left
(upward direction) or the right (downward direction).
All events selected in this way appear on a dark back-
ground.
Press the [COPY¥EVENT] button icon.
Each new selection will replace the previous one. See
also below.
E-60_50_OM_UK.book Page 142 Thursday, June 22, 2006 10:06 AM