Filter
Top Products
103
Add Finishing Touches to Your Song
Add Finishing Touches
to Your Song
16
Use channel faders 1–6 to adjust the volume balance of the
tracks. At this time, the sound that you are monitoring
(volume levels and pan) will be recorded on tracks 7 and 8 just
as you hear it. It is best to record at as high a level as possible
without allowing the sound to distort.
17
Press [FADER/MUTE] so that the IN (input) indicator is lit.
18
Use channel fader 11 (EFFECT1) to adjust the effect return
level. At this time, the sound that you are monitoring will be
recorded to tracks 7 and 8 exactly as you hear it.
19
When you finish adjusting the volume, press [STOP]. The song
will stop.
20
Press the [SELECT] button for one of the track channels you
wish to record (whether left or right does not matter). For this
example, press the track channel 7 [SELECT] button. The Track
Mixer display will appear.
21
Press [F1 (Link)]. If [F1] does not show “Link,” first press
[PAGE] so that “Link” appears, and then press [F1 (Link)].
fig.5-01b