Filter
Top Products
19
Preparations
Preparations
4
When the shutdown procedure ends correctly, the display will
indicate “PowerOFF/RESTART” (turn off the power /
restart).
fig.1-17_80
5
Lower the volume of your audio equipment.
6
Turn off the power of your audio equipment.
7
Use the rear panel POWER switch to turn off the VS-1824.
If “STORE Current?” is Displayed
When you execute various operations (including Shut-Down), “STORE
Current?” (Store the current song?) may be displayed. This message asks
whether or not you wish to store the currently selected song to disk. If you
wish to store the song before continuing with the operation, press [ENTER/
YES]. If you do not need to save the song (i.e., if you wish to discard the
recording and editing that was done up to that point, and revert to the
condition in which the song was last saved), press [EXIT/NO].
fig.1-18_80
After the power is turned
off, the hard disk will
continue rotating for a time
due to inertia. During this
time, applying physical
shock to the VS-1824 may
damage the disk. Before
moving a VS-1824, wait
approximately 30 seconds
after turning off the power.