Filter
Top Products
14
Preparations
Mixer and System Initialize
You can restore the default parameter settings of a song. This is convenient
when you have made many changes to the Input Mixer, the Track Mixer, the
Master Block, as well as changes in the System Menu screens, and you want
to quickly restore the VS-1824 to its default settings.
fig.1-12
1
Press [PLAY (DISPLAY)].
2
Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu
icon is displayed. If the System Menu icon does not appear,
press [F6 (EXIT)].
3
Press [F1 (INIT)]. If “INIT” does not appear above [F1], first
press [PAGE] until “INIT” appears, and then press [F1 (INIT)].
4
“Init Mixer/System PRM Sure ?”—”Do you want to restore
the initial mixer and system parameters?”—appears in the
display. Press [ENTER/YES]. If you want to cancel the
operation, press [EXIT/NO].
If you attempt to perform
an incorrect operation or if
the specified operation
cannot be executed, an
error message will appear
in the display. Please refer
to “Error Messages”
(Appendices p. 9) and take
the appropriate action.
If the results are not as
described in the User
Guide or Owner’s Manual
even though you have
followed the specified
steps, please refer to
“Troubleshooting”
(Appendices p. 5).
If the information in
“Troubleshooting” does
not resolve the problem,
contact a nearby Roland
Service Center or
authorized Roland
Distributor.
After initializing mixer and
system settings, many
settings will not be
affected. Some of the
settings that are not
affected by Mixer and
System Initialize include
song, Scene, tempo map,
and sync track data.
Additionally, the IDE
drive, SCSI ID, Scene
Mode, Shift Lock, and
Numerics Type settings are
not changed as a result of
Mixer/System Initialize.
4
2
2
1
3