Filter
Top Products
91
Using Effects
Using Effects
6
Press [ENTER/YES].
7
Use the TIME/VALUE dial to select how effect 2 will be
inserted. For this example, select “Ins.”
fig.4-12_80
8
Hold down [SHIFT] and press [F3 (FX A)]. The Effect A menu
will appear. If the Effect A menu does not appear, press [F6
(EXIT)].
fig.4-04_80
9
Press [F4 (FX2)].
10
Select an effect. Press [F2 (Sel)]. A list of effects will appear.
11
Use the TIME/VALUE dial to move the cursor to the effect
that you wish to use. For this example, select an effect such as
“P128 :[MM:DR20→87].”
fig.4-13_80
If the display indicates
“FX2---,” the effect (FX2) is
inserted into another
channel, and therefore
cannot be inserted into this
channel (p. 93). Either turn
off effect insertion for the
channel that is using the
effect, or insert a different
effect into this channel.