18
Top and Rear Panels
Mixer Section
fig.00-03
1. PEAK Indicators
Use these indicators to confirm the correct recording level as
set with the INPUT knobs. The indicators are set at the
factory to illuminate when the input audio reaches 0 dB. You
can change the peak level indicator setting so the indicators
illuminate when audio reaches -3 or -6 dB. (p. 255)
2. INPUT Knobs
These knobs adjust the sensitivity of the INPUT jacks 1
through 8. Turn the knob fully clockwise for mic level (-50
dBu), or fully counter-clockwise for line level (+4 dBu).
3. SELECT/CH EDIT (Select/Channel Edit) buttons
Use these buttons to change Input Mixer settings for the
analog inputs, digital inputs, stereo inputs, and effect
returns. The currently selected channel’s indicators will light.
1–8: Each input channel (1–8)
DIGITAL: Digital input
ST IN: Stereo in
EFFECT 1/3 RTN: Effect 1/3 Return
EFFECT 2/4 RTN: Effect 2/4 Return
You can assign an input to be recorded to a track by holding
down the track’s STATUS button, then pressing the desired
SELECT button for the input or source you wish to record.
Use these buttons to input alphabetical characters for Song
Names, etc., when the [NUMERIC/ASCII] is lit.
1
2
3
4
5
6
9
7 8
10
11
12
13
