Filter
Top Products
119
Add Finishing Touches to Your Song
Add Finishing Touches
to Your Song
4
Move to the location at which you started the mixdown.
5
Press [ ] so that you can view the playlist of the mastering
tracks.
6
Press [PLAY]. The mastering tracks will play back. Use the
master fader to adjust the volume to a comfortable listening
level.
At this time, the function buttons will function as follows (Owner’s Manual,
p. 40, 180).
[F1 (ZOOM+)]: Enlarges the playlist in the track direction (three levels).
[F2 (ZOOM-)]: Reduces the playlist in the track direction (three levels).
[F3 (←→)]: Enlarges the playlist in the time direction (five levels).
[F4 (→←)]: Reduces the playlist in the time direction (five levels).
[F5 (WAVE)]:
Display the sound level (waveform) that is recorded in the tracks.
7
When playback ends, press [STOP].
fig.5-22
Parameter Table (Mastering Track)
On
Off
On
Rec
Rec
Play
Mastering
Track Switch
Mastering
Track Status
Off
Record wait Status
Playback Status
If the bottom line of the
display is surrounded by a
heavy line, you can also use
the TIME/VALUE dial to
check the playlist of the
mastering tracks.
The tracks 17 and 18 fader
has no effect on the volume
level of the mastering
tracks.
fig.5-17
Signal Flow (Routing)
TR1
MASTER
MIX
Sw
MIX
LR
Track 1—16
MST TR R
Mastering
Track
MST TR L
MASTER OUT
MONITOR OUT