121
Chapter 8 EZ Routing
Chapter 8
Using EZ Routing Quick Editing
Quick Editing lets you quickly get to VS-1824’s Input Mixer, Track Mixer, effect and mastering parameters so that you can change
their values in a hurry. Once you become familiar with the many things you can do on the VS-1824, you may find Quick Editing
to be the fastest way to create a new setup.
1. Press [EZ ROUTING]. The EZ Routing icon appears in the display.
2. Press [PAGE] so “COMON” appears in the display above [F1]. The function buttons perform as described here:
[F1 (COMON)]:
This status indicator—when highlighted—shows that you are viewing the EZ Routing Common Menu. This menu shows you
the EZ Routing templates in the VS-1824’s memory. The currently selected template provides a starting point for your editing.
[F2 (INPUT)]:
Press this to display and edit Input Mixer parameters.
[F3 (TRACK)]:
Press this to display and edit Track Mixer parameters.
[F4 (FX)]:
Press this to display and edit effect parameters.
[F5 (MST)]:
Press this to display and edit Master Block parameters.
[F6 (SAVE)]:
Press this button if you wish to save your current settings as an EZ Routing template.
3. Press the F1-F5 button for the section in which you want to make changes.
4. Use [ ], [ ], [ ], and [ ] to move the cursor to a parameter you wish to edit, and turn the TIME/VALUE dial to
select the desired value. If, while making settings, the ENTER indicator blinks, press [ENTER] to adjust level and pan settings.
After the level and pan settings have been made, press [F6 (EXIT)], or you can press [EXIT/NO].
fig.02-13
Input Mixer Settings
Output destination (MIX bus or track)
Track to be recorded (up to two tracks)
Effect Send Switch
AUX Send Switch
Stereo Link
Mix Send Level
Mix Send Pan
Pop-up Window
Cursor
