Filter
Top Products
64
Making a Multi-Track Recording
fig.3-30a
4
Press [F1 (MIX)]. If [F1] does not show “MIX,” first press
[PAGE] so that “MIX” is displayed, and then press [F1 (MIX)].
5
Use the TIME/VALUE dial to modify the pan setting. For
tracks other than the one whose pan you are adjusting, you
may wish to lower the channel faders to the lowest position.
Repeat steps 1–5 to adjust the pan of the other tracks.
6
Press [PLAY]. The song will play back.
7
When playback ends, press [STOP].
8
If you wish to adjust the equalizer for other tracks, repeat steps
1–7.
67
55
4
By holding down
[SELECT (CH EDIT)] and
turning the MONITOR
knob, you can manipulate
the panning for the
channel.
If you adjust the pan while
sound is playing, you may
notice “blips” in the sound.
This is not a malfunction. If
you find it annoying, adjust
the pan when the sound is
not playing.
You can use one of the
following methods to check
and modify the pan setting
of each track in a single
display screen.
Method 1.
Press [F6 (PRM.V)].
Method 2.
Hold down [SHIFT]
and press the track
channel 1 [SELECT].