Filter
Top Products
92
Voice Mode
■ Thru Gain
Determines the amount of the signals that does not
pass through the filter, or the original dry sound.
❏ Settings: 0~255
The Thru Gain is displayed and effective only when a
filter type other than LPF24A, LPF24D, LPF18 and
Thru is selected, and the Connect setting (see below) is
set to seri (serial).
■ Connect
Sets how the DCF1 and DCF2 are connected. There
are two types of connections available.
❏ Settings: seri (serial), para (parallel)
The Connect parameter is displayed only when a filter
type other than LPF24A, LPF24D, LPF18 or Thru is
selected.
The following three parameters are displayed only
when a filter type other than LPF24A, LPF24D, LPF18
or Thru is selected, and the Frequency Characteristics
screen is not selected.
The parameters added in the All Parameters Screen.
■ DCF1/2 Reso (F1/2 Resonance)
Turns the resonance effect on or off for the DCF1/2.
❏ Settings: on, off
■ DCF1/2 LFO (F1/2 LFO)
Turns the LFO (Low Frequency Oscillator) effect on
or off for the DCF1/2.
❏ Settings: on, off
■ DCF1/2 EG (F1/2 EG)
Turns the PEG effect on or off for the DCF1/2.
❏ Settings: on, off
The following filter types are available for the DCF 1/2.
Filter
Gain
DCF2DCF1
seri
Thru
Gain
F1
Gain
DCF2
DCF1
para
F2
Gain
LPF (Low Pass Filter)
The LPF passes the signals below the specified cutoff
frequency and cuts the signals above it. There are five
different types of Low Pass Filters for the DCF1.
LPF24A (Low Pass Filter 24A):
Digital dynamic filter similar to a -24dB/oct low pass filter of
an analog synthesizer.
LPF24D (Low Pass Filter 24D):
-24dB/oct low pass filter-type digital dynamic filter with
pronounced resonance.
LPF18 (Low Pass Filter 18):
-18dB/oct low pass filter-type digital dynamic filter.
LPF12 (Low Pass Filter 12):
-12dB/oct low pass filter-type digital dynamic filter.
LPF12
LPF18
Resonance
LPF24D
Rezonance
LPF24A
FrequencyCutoff Frequency
Level
-6db/oct
-12db/oct
-18db/oct
-24db/oct
Voice/E.qx 5/21/98 11:30 AM Page 92