Filter
Top Products
Clearing the Undo Buffer 201
03D—Owner’s Manual
• Fader moves are edited “on the fly” (see Editing Fader Moves On-the-fly on page 190)
• Automix events are extracted (see Extracting Events on page 198)
The UNDO BUF. SIZE window displays the amount of memory being
used by the undo buffer.
4. To undo changes to the automix, use the cursor buttons to select the
UNDO switch, which is located above the ABORT switch, and then press
the [ENTER] button.
If you are using a mouse, simply click the UNDO switch.
A confirmation dialog box appears.
5. Use the cursor buttons to select OK, and then press the [ENTER] button.
If you are using a mouse, simply click OK.
The contents of the undo buffer are copied to the current automix.
Clearing the Undo Buffer
The contents of the undo buffer can be cleared at anytime. This can be used to free up
memory for further recording, or simply to clear the undo buffer contents that are no
longer required.
1. Use the [AUTOMIX] button to locate the Main page.
2. Use the cursor buttons to select the CLEAR BUFFER switch, and then press
the [ENTER] button.
If you are using a mouse, simply click the CLEAR BUFFER switch.
A confirmation dialog box appears.
3. Use the cursor buttons to select OK, and then press the [ENTER] button.
If you are using a mouse, simply click OK.
The contents of the undo buffer are cleared, and the UNDO BUF. SIZE window indi-
cates 0K.