Filter
Top Products
214 Chapter 17—Other Functions
03D—Owner’s Manual
Checking the Battery
The 03D uses a long-life battery to maintain its internal memories. The battery should
last for up to five years. You can check its condition on the Prefer. page.
1. Use the [UTILITY] button to locate the Prefer. page shown below.
If the battery monitor indicates that the battery is low, contact your Yamaha dealer
about having the battery changed. Do not attempt to change the battery yourself.
Initializing the 03D
Initialization allows you to reset 03D settings, scene memories, and libraries to their ini-
tial values (i.e., the factory settings).
To reset just the mix settings, recall mix scene 00. See Scene Memory 00 on page 165 for
more information.
1. Turn off the 03D.
2. While holding down the [STORE] button, turn on the 03D.
A dialog box appears with the following three options. The dialog box appears for about
7 or 8 seconds, so you must make your choice within that time.
1. Clear Edit Buffer and Setup Memory.
2. Clear all memories and reset the 03D to its initial settings.
3. Cancel this dialog box.
3. Release the [STORE] button and select an option.
Calibrating the Faders
If the 03D is not used for a long time, is moved to a new location, or fader movements
have been obstructed, the faders may need calibrating. The calibration process calcu-
lates the torque required by each fader motor to drive its fader accurately and smoothly.
1. To calibrate the faders, turn off the 03D.
2. While holding down the [ENTER] button, turn on the 03D.
The fader calibration process starts. When the faders return to their original positions,
calibration is complete.
Note: Failure to change a low battery may result in data loss.