Filter
Top Products
Control panel
>
10
MIDI (IN, OUT) connectors:
Connectors that are used to
connect other MIDI devices
(sequencer, keyboards, etc.).
OUT: Data output (to be
connected to the MIDI IN
connector of another MIDI
device). IN: Data input (to be
connected to the MIDI OUT
connector of another MIDI
device).
Pedals connec-
tor:
Connect the
supplied pedals
to this connector.
OUTPUT (L/MONO, R) connec-
tors:
Audio outputs. Connect
these connectors to an external
amplifying system. (With a hi-fi
system use the LINE, AUX, CD or
TAPE connectors, not the
PHONO connector). To amplify
the C-520 in mono, connect the
single L/MONO connector. Use
the MASTER VOLUME knob to
set the output volume.
USB connector:
Type B (slave),
USB 1.1-compliant, standard
connector. Connects to a per-
sonal computer (PC or Mac).
Can be used for data transfer
(see page 56), or USB Over
MIDI use (see page 59).
AC ADAPTER
connector:
Connect the
supplied AC/
DC adapter to
this connec-
tor.
PHONES connector:
Con-
nect one or two pairs of
headphones to these jacks.
The integrated speakers
will turn off.
INPUT (L/MONO, R) connectors:
Line audio inputs. Connect to
these connectors an external
audio source, such as a CD, MP3
or tape player, or another key-
board. To connect a microphone,
you need an external microphone
preamplifier or a mixer.
Warning:
Avoid connecting the
output of a power amplifier to
these inputs!