126
Recording/playing back a performance
Playing back and stopping a recorded
performance
Playing back/stopping
1. For the audio tracks that you wish to play, press [STATUS] to get the button to
light in green.
2.
Press ZERO [ ] to return the SONG POSITION to “00:00:00-00” (beginning of the song).
3. Press PLAY [ ] to start playback.
4. Press STOP [ ].
The song stops.
Adjusting the volume of each track
Use the AUDIO TRACK faders to adjust the playback volume of each audio track.
Silencing a specific audio track—Mute
1. Press [STATUS] to extinguish the light.
The sound of that track will be silenced (muted).
To hear the sound once again, press [STATUS] to get it to light in green.
Saving Song settings on a CD-RW disc
The following parameters can be saved on a CD-RW disc.
• Mixer parameter • Maker parameter
• Rhythm Guide parameter • Tempo Map parameter
• Sequence parameter • Effects Location parameter
• Song parameter • Master parameter
Saving Song settings
1. Press [UTILITY].
The Menu are displayed as icon.
fig.31-14
2. Press CURSOR [ ] to select the
CD-R/RW Disc icon.
3. Press [YES/ENTER].
The CD-R/RW Disc Menu are displayed as icon.
fig.31-14
4. Make sure that the cursor is located at the
Save Song icon.
5. Press [YES/ENTER].
The display will indicate “Processing...,” and the data will be saved. When saving is
completed, the display will show a message of “Completed.”
6. Press [DISPLYAY] to return to the Basic screen.
When BUSY indicator is lit,
CDX-1 is preparing for
playback. Thus, the playback
do not immediately start when
it is lit. In this case,
PLAY
[] blinks.
It is not possible to change the
[STATUS] during the song is
playing.
For details on each parameter,
refer to “Parameter List”
(p. 208).
This operation does not save
the Pad/Sequence to CD-RW.
In order to save the Pad/
Sequence, you must perform
the operation “Saving Pad/
Sequence” (p. 67).
Song settings can be saved on
a CD-RW disc, when the
power is turned off (p. 34),
when a CD-RW disc is
removed (p. 36), or when you
mixdown (p. 133).