Filter
Top Products
38
Basic operation of the CDX-1
If you are confused about operations or screens
—Going back to the Basic screen
While you are still unfamiliar with operation, you may come upon a screen you do
not recognize. If this occurs, you can press [DISPLAY] to return to one of the Basic
screens (the most-recently selected one). (Refer to “The Basic screens,” above.)
Adjusting the brightness of the screen display—Contrast
The contrast of the display will change depending on the viewing angle and the
temperature. If you have difficulty reading the display, use the following procedure
to adjust the contrast.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.15-14
2. Make sure that the cursor is located at the
LCD Contrast icon.
3. Press [YES/ENTER].
fig.15-15
The LCD Contrast Setting screen appears.
4. Turn the TIME/VALUE dial to adjust the contrast.
5. Press [DISPLAY] to return to the Basic screen.
Switching the Big Time display
The units indicated can be switched “Measure/Beat /Tick” or “Hour/Minute/Second/
Frame.”
1. Press [UTILITY].
The Menu are displayed as icon.
ffig.2-06
2. Press CURSOR [ ] to select the System
icon.
3. Press [YES/ENTER].
The System settings screen appears.
4. Press CURSOR [ ] [ ] to move the cursor to “Time Disp.”
5. Turn the TIME/VALUE dial to select “TIME CODE” or “MEASURE.“
● Time Disp:
TIME CODE: Display “Hour/Minute/Second/Frame.”
fig.15-15a
MEASURE: Display “Measure/Beat /Tick.”
ig.15-15b
6. Press [DISPLAY] to return to the Basic screen.
Hold down [UTILITY] and
turn the TIME/VALUE dial,
the contrast of display will be
changed.