170
Major Message List
● Bank is protected.
The operation cannot be executed since the pad bank is
protected.
● Canceled.
The operation was canceled.
● Can't execute.
Cannot execute this operation.
● Can't insert to this point.
Cannot insert to this point.
● Can't UNDO.
Undo is not possible.
● Can't use PAD/SEQ now.
Pad/Sequence cannot be used.
● CD-ROM is not ready.
The CD-ROM from which to load the WAVE file is not ready.
● Checking disc...
● Checking...
Now checking the disc. Please wait.
● Coaxial input locked.
Locked to digital input (coaxial).
● Coaxial input unlocked.
Could not lock to digital input (coaxial).
● Completed.
The operation has been completed.
● Convert data. Are you sure?
Do you want to convert the WAVE file?
● DIMM error.
An error occurred while checking the DIMM.
● Disc is not for audio.
This disc is not made for audio.
● Disc full.
The disc is full.
● Do you want to burn a CD?
Do you want to burn the CD?
● Do you want to finalize a CD?
Do you want to finalize the CD-R?
● Do you want to initialize the disc?
The data will be initialized when you execute the format
operation. Do you want to execute?
● Eject disc? (not saved)
Do you want to eject the disc without saving the song?
● Finalize failed.
Failed to finalized the disc.
● Format failed.
Failed to format the disc.
● Initialize All param. Are you sure?
OK to initialize all parameters?
● Initialize Effects param. Are you sure?
OK to initialize effect parameters?
● Initialize Global param. Are you sure?
OK to initialize global parameters?
● Initialize Mixer param. Are you sure?
OK to initialize mixer parameters?
● Insert a Destination disc.
This disc is the backup source disc.
Please insert the backup destination disc.
● Insert CD-R disc.
Insert a CD-R disc.
● Insert CD-RW disc.
Insert a CD-RW disc.
● Keep take?
Do you wish to save the data on CD-RW disc?
● Load error.
An error occurred while loading data.
● Load PAD/SEQ data?
Do you want load pad and sequence data?
● Marker does not exist.
There are no markers.
● Master track does not exist.
There is no master track.
● Memory full.
There is not enough memory to execute the operation.
● Memory low, cannot UNDO. Continue?
There is not enough memory to undo this operation. Execute
anyway?
● MTR disc not ready.
The MTR disc is not inserted in the drive.
● No PAD/SEQ data to save. Save anyway?
No pad/sequence data was found.
● Not CD-RW disc.
This disc is not a CD-RW disc.
● Not HIGH-SPEED CD-RW.
This is not a high-speed compatible CD-RW disc.
● Not supported.
The specified file is not in a format that can be converted.
● Not WAVE file.
The specified file is not a WAVE file.
● Now playing SCRUB.
Now scrubbing.
● Now Processing...
Now processing. Please wait.
● Now recording...
Now recording pads.
