Filter
Top Products
202
Insert effect algorithm list
Available types of modulation and their effect
Parameter (full name) Setting Function
● [FLG] FLANGER (Flanger): The flanger effect gives a twisting, jet-airplane-like character to the sound.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the flanger effect on/off.
Rate (Rate) 0–100 Determines the rate of the flanging effect.
Depth (Depth) 0–100 Determines the depth of the flanging effect.
Manual (Manual) 0–100 Adjusts the center frequency at which to apply the effect.
Resonance (Resonance) 0–100 Determines the amount of resonance (feedback). Increasing the value will
emphasize the effect, creating a more unusual sound.
Separation (Separation) 0–100 Adjusts the diffusion. The diffusion increases as the value increases.
Effective when stereo output is used.
● [CHO] CHORUS (Chorus): A sound with a subtly shifted pitch is added to the direct sound, making the final output
sound thicker and broader.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the chorus effect on/off.
Rate (Rate) 0–100 Adjusts the rate of the Chorus effect.
Depth (Depth) 0–100 Adjusts the depth of the Chorus effect.
Pre Delay (Pre Delay) 0.5–50 mS Adjusts the time needed for the effect sound to be output after the direct
sound has been output.
Effect Level 0–100 Adjusts the volume of the effect sound.
Best results will be achieved when stereo output is used.
● [PH] PHASER (Phaser): By adding varied-phase portions, the phaser effect gives a whooshing, swirling character
to the sound.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the phaser effect on/off.
Rate (Rate) 0–100 This sets the rate of the Phaser effect.
Depth (Depth) 0–100 Determines the depth of the Phaser effect.
Manual (Manual) 0–100 Adjusts the center frequency of the phaser effect.
Resonance (Resonance) 0–100 Determines the amount of resonance (feedback). Increasing the value will
emphasize the effect, creating a more unusual sound. Setting it to a minus
value will create resonance having a reversed phase.
● [PS] P.SHIFT (Pitch Shifter): This effect changes the pitch of the original sound (up or down) within a range of two
octaves.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the pitch shifter effect on/off.
Pitch (Pitch) * -24–DETUNE–+24 Adjusts the amount of pitch shift (the amount of pitch change) in semitone
steps. By selecting “DETUNE,” you can add a slightly pitch-shifted sound
to the input sound, producing a detune effect.
D:E Balance (Effect Balance) 100:0–0:100 This adjusts the volume balance of the direct and effect sounds.
Separation (Separation) -100–+100 Adjusts the diffusion. The panning of the direct sound and effect sound can
be spread to left and right. Effective when stereo output is used.
● [DBL] DOUBL'N (Doubling): An effect of multiple sounds heard together (a doubling effect) is produced.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the doubling effect on/off.
Delay Time (Delay Time) 0.5–50 mS This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
Separation (Separation) -100–+100 Adjusts the diffusion. The panning of the direct sound and effect sound can
be spread to left and right. Effective when stereo output is used.
Effect Level (Effect Level) 0–120 This adjusts the volume of the delay sound.
The best effect is achieved when stereo output is used.