Filter
Top Products
192
Insert effect algorithm list
9. ACOUSTIC GUITAR
This is a multi-effect designed for acoustic guitar. Even when an electric-acoustic is connected at line level, this provides a
warm sound similar to what is obtained through a microphone.
Parameter (full name) Setting Function
● ACP (Acoustic Processor): With this feature, you can change the sound from a pickup on an electric-acoustic guitar
into a richer sound.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the acoustic processor effect on/off.
Body (Body) -100–+100 This adjusts the resonance of the sound caused by the body. That is, it
adjusts the softness and fatness of the sound which is the typical
characteristics of acoustic guitars.
Mic Distance (Mic Distance) -100–+100 This models the distance between the microphone capturing the sound of
an acoustic guitar and the guitar itself.
Level (Level) -100–+100 This adjusts the volume of the acoustic processor.
Best results will be achieved when stereo output is used.
● COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the compressor effects on/off.
Sustain (Sustain) 0–100 Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Attack (Attack) 0–100 Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Level (Output Level) 0–100 Adjusts the volume.
● EQ (Equalizer): A 4-band equalizer.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the equalizer effect on/off.
Low Gain (Low Gain) -20–+20 dB This parameter sets the gain (amount of boost or cut) for the bass
equalizer.
Low-Mid Gain (Low-Mid Gain) -20–+20 dB This parameter sets the gain (amount of boost or cut) for the low-midrange
equalizer.
Low-Mid Freq (Low-Mid Freq) 100–10.0 kHz This parameter sets the central frequency for the low-midrange equalizer.
Low-Mid Q (Low-Mid Q) 0.5–16 This parameter sets the range of change in gain for the frequency set by
“Low-Mid Freq.” A larger value results in a narrower range of change.
High-Mid Gain (High-Mid Gain) -20–+20 dB This parameter sets the gain (amount of boost or cut) for the high-midrange
equalizer.
High-Mid Freq (High-Mid Freq) 100–10.0 kHz This parameter sets the central frequency for the high-midrange equalizer.
High-Mid Q (High-Mid Q) 0.5–16 This parameter sets the range of change in gain for the frequency set by
“High-Mid Freq.” A larger value results in a narrower range of change.
High Gain (High Gain) -20–+20 dB This parameter sets the gain (amount of boost or cut) for the treble
equalizer.
Level (Output Level) -20–+20 dB This parameter adjusts the volume after the equalizer stage.
Compressor Equalizer
Noise
Suppressor Delay
Acoustic
Proccessor