Filter
Top Products
74
Playing the pad samples
Preventing specific samples from
sounding simultaneously—Mute Groups
Samples that do not need to sound simultaneously (or that you do not want to be
heard simultaneously) can be assigned to the same mute group. The CDX-1 has
seven mute groups, and samples that are assigned to the same mute group will not
sound together with each other.
fig.32-05e
1. Press PAD RECORDING [TEMPO MATCH] twice.
Alternatively, press [TEMPO MATCH] and then press CURSOR [ ].
fig.31-03
The Pad Edit menu are displayed as icons.
fig.32-01
2. Make sure that the cursor is located at the
pad parameter icon.
3. Press [YES/ENTER].
The pad parameter screen appears.
4. Press the pad whose sample you wish to set.
The specified pad blinks.
fig.32-02c
5. Press CURSOR [ ] to move the cursor to
“Mute Group” line.
6. Turn the TIME/VALUE dial to select “OFF” or “GROUP-1”–”GROUP-7.”
7. If you wish to make settings for another sample, press the appropriate pad and
repeat steps 4 and 5.
8. Press [DISPLAY] to return to the Basic screen.
If you press two or more pads
that are assigned to the same
mute group, the sample that
was pressed first will be muted
(silenced).
PAD 1
PAD 1
PAD 1
Release
Press
Release
Press
Mute Mute
PAD 2
PAD 2
Release
Press
Mute
PAD 3
PAD 3
Release
Press
Time
Playing samples that are set to the same Mute group (Example)
If you wish to make settings
for a sample of another pad
b
ank, you must first switch the
pad bank (p. 54).