Filter
Top Products
65
Recording a sound to a pad—Sampling
Recording a sound to a pad
Deleting a sample—Delete Sample
Here’s how you can delete an unwanted sample to free up that pad.
Deleting samples individually
1. Hold down PAD RECORDING [DELETE] and Press a pad to specify the sample
that you wish to delete.
The sample is deleted.
You wish to cancel to delete a sample, press [UNDO/REDO] (p. 138).
Deleting all samples of a pad bank—Bank Erase
1. Press PAD RECORDING [TEMPO MATCH] twice.
Alternatively, press [TEMPO MATCH] and then press CURSOR [ ].
fig.31-03
The Pad Edit menu are displayed as icons.
fig.31-10
2. Press CURSOR [ ] to select the Bank
Erase icon.
3. Press [YES/ENTER].
fig.31-11
The Erase Bank screen appears.
4. Turn the TIME/VALUE dial to specify the pad bank to be deleted.
5. Press [YES/ENTER].
A message of “Are you sure?” appears.
6. Press [YES/ENTER] once again.
All samples of the specified pad bank will be erased.
7. If you wish to erase other pad banks, repeat steps 4 and 6.
8. Press [DISPLAY] to return to the Basic screen.
If you carry on bank erase, a
pad bank name (p. 55) will be
remained without a erasing.