Filter
Top Products
188
Insert effect algorithm list
7. ACOUSTIC MDL (Acoustic Guitar Modeling)
This is a multi-effect designed for electric guitar. It allows you to use an electric guitar to produce sounds similar to those
of an acoustic guitar.
Parameter (full name) Setting Function
● A.MDL (Acoustic Guitar Modeling): This models the sound of an acoustic guitar.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the acoustic guitar modeling effect on/off.
Pick Up Type (Pick Up Type) SINGLE, HUMBUCK Set this to the type of pickup on the connected guitar.
Character (Character) STD This is a normal acoustic guitar.
JUMBO This is an acoustic guitar with a body that is bigger than STANDARD. The
bass sound is powerful.
ENHANCE This is an acoustic guitar that with a more responsive attack, so the guitar
will retain more of its prominence in almost any situation.
PIEZO This models the sound you would get from a pickup installed on an electric-
acoustic guitar.During the attack, a certain amount of compression will be
applied.
Top-Hi (Top-Hi) -100–+100 * Adjust the level of the direct sound from the strings. That is, it adjusts the
harmonic contents.
Top-Mid (Top-Mid) -100–+100 * This adjusts the interference to the strings made by the top plate. That is,
it adjusts the attack sense.
Body (Body) -100–+100 * This adjusts the resonance of the sound caused by the body. That is, it
adjusts the softness and fatness of the sound which is the typical
characteristics of acoustic guitars.
Level (Level) 0–100 This adjusts the volume of the acoustic guitar modeling.
* If Top-Hi, Top-Mid, and Body are all set to “-100”, there will be no sound.
If you set the pickup selector of your guitar to the front position, the desired effect will be easier to achieve.
● COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the compressor effects on/off.
Sustain (Sustain) 0–100 Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Attack (Attack) 0–100 Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Level (Output Level) 0–100 Adjusts the volume.
Compressor Equalizer
Noise
Suppressor
Chorus
(*1)
Flanger
Pitch Shifter
Phaser
Doubling
Tr emolo/Pan
Delay
*2 Chorus can be replaced one of the following effects.
Acoustic
Guitar
Modeling