Filter
Top Products
190
Insert effect algorithm list
8. BASS MDL (Bass Guitar Modeling)
Models the sound of a bass guitar. Obtain the sound of a bass guitar while playing an electric guitar.
Parameter (full name) Setting Function
● B.MDL (Bass Modeling): Models the sound of a bass guitar.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the bass modeling effect on/off.
Character (Character) LOOSE, TIGHT Bass tone characteristic is set. When “LOOSE“ is selected, as if the string
gauge was getting thicker.
Level (Level) 0–100 This adjusts the volume of the bass modeling.
You should avoid playing chords when using the Bass modeling.
● COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the compressor effects on/off.
Sustain (Sustain) 0–100 Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Attack (Attack) 0–100 Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Level (Output Level) 0–100 Adjusts the volume.
● DEFRET (Defretter): This models a fretless bass.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the defretter effect on/off.
Sensitivity (Sens) 0–100 This controls the input sensitivity of the Defretter. It should be adjusted for
the bass guitar you have until you get the harmonic changes to sound
natural.
Attack (Attack) 0–100 This controls the attack of the Defretter. Increasing the value will cause the
harmonics to change more slowly, thus producing a relatively attack-less
sound, similar to a fretless bass.
Depth (Depth) 0–100 This controls the rate of the harmonics. Increasing the value will increase
the harmonic content and therefore will create a more unusual sound.
Level (Level) 0–100 Adjusts the volume of the defretter sound.
Defretter
Flanger
Pitch Shifter
Phaser
Doubling
Tr emolo/Pan
*1 Compressor can be replaced with Defretter.
Compressor
(*1)
Noise
Suppressor Chorus
(*2)
Bass
Modeling
*2 Chorus can be replaced one of the following effects.