Filter
Top Products
156
Using the CDX-1 with other MIDI devices
Using MMC
This section explains how to make settings for synchronizing the playback with a
computer-based MIDI sequence program that supports MMC and MTC.
Using the CDX-1 as the MMC master
1. Make connections as follows.
fig.5-30
The CDX-1 will be the master for MMC and MTC.
2. Press [UTILITY].
The Menu are displayed as icon.
fig.12-06
3. Press CURSOR [ ] to select the MIDI
icon.
4. Press [YES/ENTER].
The MIDI settings screen appears.
fig.12-07
5. Press CURSOR [ ] to move the cursor to
“MMC Mode” line.
6. Turn the TIME/VALUE dial to select “MASTER.”
● MMC Mode: Specify how the CDX-1 will use MMC.
Off: MMC will not be transmitted.
MASTER: MMC will be transmitted. The CDX-1 will be the master for external
MIDI devices.
SLAVE: MMC will be received. The CDX-1 operates as the slave of an external
MIDI device.
7. Make settings to allow MTC synchronization.
Use the procedure of step 5 and following in “Using MTC (master)” (p. 154).
8. Make settings on your sequence software.
Make the following settings on your sequencer software. For details on making these
settings, refer to the manual for your sequencer software.
• MTC: receive
• MTC type: same setting as the MTC Type selected on the CDX-1
• MMC: receive
9. Press [DISPLAY] to return to the Basic screen.
MMC (p. 205)
Some MIDI devices do not
support the CDX-1’s MMC
functionality. If so, it will not
b
e possible to operate them
from the CDX-1 using the
methods described here. For
details on the MMC
functionality supported by the
CDX-1, read “MIDI
Implementation” (p. 212).
MIDI OUTMIDI IN
CDX-1
For details on the supported
MMC functions, refer to “MIDI
Implementation” (p. 212).