Filter
Top Products
174
Mixer effect parameter functions
EQ (Equalizer): This is a two-band equalizer that is independent for each track.
Parameter (full name) Setting Function
EQ StereoLink (EQ Stereo Link) OFF, ON When EQ Stereo Link is ON, you can have the setting for a pair of audio
tracks, linked so that they adjust in the same way.
EQ On/Off (EQ On/Off) OFF, ON This parameter turns the equalizer effect on/off.
Low Gain (Low Gain) -12–+12 dB This sets the gain (-12 to +12 dB) for the low-range equalizer (shelving
type).
Low Freq (Low Frequency) 40 Hz–1.5 kHz This sets the center frequency (40Hz to 1.5 kHz) for the low-range
equalizer (shelving type).
High Gain (High Gain) -12–+12 dB This sets the gain (-12 to +12 dB) for the high-range equalizer (shelving
type).
High Freq (High Frequency) 500–18 kHz This sets the center frequency (500 Hz to 18 kHz) for the high-range
equalizer (shelving type).
Loop Effect
CHORUS/DELAY/DOUBL’N (Chorus / Delay / Doubling)
Parameter (full name) Setting Function
Effect Type CHORUS A sound with a subtly shifted pitch is added to the direct sound, making the
final output sound thicker and broader.
DELAY This creates a thicker sound by applying a delayed sound to the direct
sound.
DOUBL’N By adding a slightly time-delayed sound to the direct sound, this produces
the impression that multiple sources are sounding together (a “doubling”
effect). The delayed sound will be output from the side opposite to which
the playback track has been panned.
■ When “CHORUS” is selected
Rate 0–100 Adjusts the rate of the Chorus effect.
Depth 0–100 Adjusts the depth of the Chorus effect.
Pre Delay 0.5–50 mS Adjusts the time needed for the effect sound to be output after the direct
sound has been output.
Effect Level 0–100 Adjusts the volume of the effect sound.
■ When “DELAY” is selected
Delay Time 10–1000 mS This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
Feedback 0–100 This parameter adjusts the amount of feedback. Changing the amount of
feedback causes the number of time the delayed sound is repeated to
change as well.
Effect Level 0–100 This adjusts the volume of the delay sound.
Reverb Send 0–100 Adjust the volume of the reverb that is applied to the delayed sound. For
details on reverb, refer to “Reverb” (p. 146).
■ When “DOUBL’N” is selected
Delay Time 0.5–50 mS This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
Effect Level 0–100 This adjusts the volume of the delay sound.
REVERB (Reberb): This feature adds reverberation to the sound to model the size of space such as a hall and a room.
Parameter (full name) Setting Function
Reverb Type ROOM Models the reverberation in a small room.
HALL Models the reverberation in a concert hall.
Reverb Time 0.1–10 This parameter adjusts the duration (time) of the reverb.
Reverb Tone -12–+12 Adjusts the tone.