Filter
Top Products
11
Using control maps
7
Operate PCR Editor or your DAW software to transmit the control map data.
Select “EDIROL PCR” as the MIDI output device for PCR Editor or your DAW
software. For details on how to make this setting in your DAW software, refer to
the owner’s manual for the DAW software you’re using.
fig.D-End.eps
8
When the PCR has finished receiving the control map data, the
display will indicate “END.” Press the [ENTER] button to complete
the operation.
Control map data received as Single Bulk will be loaded into the current
memory, meaning that it will be lost when you turn off the power. However, if
you save this control map into one of the internal memories, you won’t need to
re-transmit it to the PCR. Refer to
Saving a control map
(p. 9).
Error indication
If the data was not received correctly, “ERR” will be blinking in the
display. If this occurs, press the [CANCEL] button and perform the
procedure again from step 1.
PCR-300_500_800_e.book 11 ページ ２００６年１２月１９日 火曜日 午後２時５９分