Filter
Top Products
36
Playing (Play mode)
The PCR-300/500/800’s keyboard has two parts—Lower and Upper—and you can select different sounds for each part.
The entire keyboard will play the Lower sound.
fig.Lower.eps_80
1
Press the [LOWER] button so it’s lit.
2
Press the [PROGRAM CHANGE] button, and turn the VALUE knob. The Lower
sound will change.
When you play the keyboard, you’ll hear the sound you selected for the Lower part.
The entire keyboard will play the Upper sound.
fig.Upper.eps
1
Press the [UPPER] button so it’s lit.
2
Press the [PROGRAM CHANGE] button, and turn the VALUE knob. The Upper
sound will change.
When you play the keyboard, you’ll hear the sound you selected for the Upper part.
Selecting the Lower and Upper sounds
Selecting the Lower sound
LOWER
Selecting the Upper sound
UPPER
Lower and Upper
Use the [UPPER] button and [LOWER] button to switch between the Upper part and
Lower part.
When the [UPPER] button is lit, performance data from the keyboard (notes and
aftertouch), bender lever (pitch and modulation), and foot pedal, as well as program
change messages, will be transmitted on the current channel specified for the Upper
part.
Octave Shift settings can be made independently for each part, and will be
remembered while you’re performing.
* If MIDI messages are assigned to aftertouch or the bender lever, they will be transmitted on the
assigned MIDI channel, not on the current channel.
PCR-300_500_800_e.book 36 ページ ２００６年１２月１９日 火曜日 午後２時５９分