Filter
Top Products
62
Settings (Edit mode)
Master Volume
“F0 7F 7F 04 01 vL vM F7”
Since the data range of the Master Volume message is 00 00–7F 7F and there’s no need to specify this range, you can choose basic editing. Since the data format is two bytes in the
order of LSB MSB, choose “DT3” (p. 59) when inserting the data.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Slightly move the controller to which you want to assign the system exclusive
message. If the controller is a button, press it.
The display will indicate the number of the controller you selected.
3
Check the indication in the display, then press the [ENTER] button.
4
Turn the VALUE knob to make “SE” appear.
5
Press the [ENTER] button.
6
Turn the VALUE knob to make “SE0” appear.
7
Verify that the display is correct, then press the [ENTER] button.
The display will show the first byte “F0” (beginning status) of the system exclusive
message. (This cannot be changed.)
8
Check the indication in the display, then press the [ENTER] button.
9
Use controllers [A8 (7)] and [B8 (F)] to enter the second byte “7F.”
10
Check the indication in the display, then press the [ENTER] button.
11
In the same way, enter the third byte “7F,” fourth byte “04,” and fifth byte “01.”
12
Since the sixth byte is the data area, press the [DATA] button and then press
controller [A4 (3)].
The display will indicate “DT3.”
13
Check the indication in the display, then press the [ENTER] button.
14
Because you selected “DT3” at the sixth byte, the seventh byte is automatically
allocated as the data area, and cannot be edited.
The display will indicate “-DT.”
15
Check the indication in the display, then press the [ENTER] button.
16
Use controllers [B8 (F)] and [A8 (7)] to enter the ending status “F7.”
17
Check the indication in the display, then press the [ENTER] button.
18
Specify the output port. (->
Port setting
(p. 65))
19
As appropriate for the type of controller, set the button mode (p. 64) or the virtual
center click setting (p. 65).
This completes the steps necessary to assign the Master Volume message.
PCR-300_500_800_e.book 62 ページ ２００６年１２月１９日 火曜日 午後２時５９分